China NEMA 8 Ratio 27: 1 Planetary Gear Reducer Geared Stepper Motor with Gearbox brushless motor

Solution Description

 

Item Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Software:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc.

Item Parameters

Planetary Gear Box Specification:

Housing Content Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Enjoy of Shaft (close to to Flange) ≤0.08mm
Axial Perform of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

20HS Hybrid Stepping Motor Requirements:

Model No. Step Angle Motor Duration(L1) Rated Existing Resistance Inductance Holding Torque # of Prospects Rotor Inertia Mass Max.Gear Ratio
Voltage /Period /Stage /Section
One Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 thirty three.25 .5 six.five 1.5 15 four two .06 ≤1:369
20HS6401 one.eight forty one four.four .8 5.5 one.five 30 four 3 .one ≤1:369

20HS1450 Planetary Gearbox Motor Requirements:

Reduction ratio three.71 five.18 14 19 27 fifty one seventy one 100 139 189 264 369
Total Peak(L1+L2) (mm) 53.four fifty three.4 60 sixty 60 sixty six.four 66.4 sixty six.four 66.four seventy two.eight seventy two.8 seventy two.eight
Output torque ( mN.m) 50 70 one hundred seventy 231 328 558 777 1095 1522 1871 2000 2000
Total Bodyweight(g) 91 ninety one 97 ninety seven ninety seven 103 103 103 103 109 109 109
Number of gear trains 1 2 3 4
Reducer Duration(L2)   (mm) 23.four 30. 36.4 42.eight
Effectiveness 90% 81% 73% 66%

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.eighteen fourteen 19 27 fifty one 71 one hundred 139 189 264 369
Complete Top(L1+L2) (mm) 64.four 64.4 71 seventy one seventy one 77.four 77.four seventy seven.four 77.four 83.eight eighty three.8 83.eight
Output torque ( mN.m) one hundred 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Overall Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of equipment trains 1 2 3 4
Reducer Length(L2)   (mm) 23.four 30 36.4 42.eight
Efficiency 90% 81% 73% 66%

 

In depth Pictures

 

Organization Profile

ZheJiang UMot Technology Co., Ltd. specializes in R&D and income of stepper motors, servo motors, linear modules and associated motion management merchandise, customizing and creating higher-high quality motor items for consumers with unique requirements around the entire world, and supplying general options for movement management programs. Merchandise are exported to far more than 30 nations around the world and regions including the United States, Germany, France, Italy, Russia, and Switzerland. The company’s major goods and program design have been broadly employed in automation control, precision devices, health care products, sensible residence, 3D printing and a lot of other fields.
Our firm has been recognized as a high-tech enterprise by relevant departments, has a full good quality administration technique, has received ISO9001, CE, RoHs and other connected certifications, and holds a quantity of electrical patent certificates. “Focus, Professionalism, Concentration” in the subject of automation of motor R&D and program management answers is the company’s business goal. “Be your most reliable associate” is the firm’s support philosophy. We have always been aiming to “make 1st-course items with professional technology”, preserve pace with the occasions, innovate constantly, and give more end users with far better goods and providers.

FAQ

1. Delivery strategy:
one)Global Categorical shipping DHL&FEDEX &UPS&TNT& 7-10days
two)Delivery by air 7-10 times
3)transport by sea, shipping time depends on the spot port.

two. Technological Assistance:
We can offer you with specialist technological support. And our merchandise good quality promise is 6 months. Also, we acknowledge merchandise customized.

3. Why should you get from us, not from other suppliers?
Specialist one-to-1 motor custom-made. The world’s big enterprise of choice for substantial-quality suppliers. ISO9001:2008 good quality management program certification, by means of the CE, ROHS certification.

four. How to pick types?
Before acquiring, please make contact with us to verify product No. and requirements to stay away from any misunderstanding.

5. Are you a manufacturing unit?
Indeed, we are a manufacturing facility, and we produce stepper motor/driver, Servo motor/driver.

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Precision Medical Instruments
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%

/ Piece
|
1 Piece

(Min. Order)

###

Application: Precision Medical Instruments
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 50N
Max.Shaft Axial Load 30N
Radial Play of Shaft (near to Flange) 0.08mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

20HS Hybrid Stepping Motor Specifications:

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
20HS1405 1.8 30 3.25 0.5 6.5 1.5 15 4 2 0.06 1:369
20HS6401 1.8 41 4.4 0.8 5.5 1.5 30 4 3 0.1 1:369

###

20HS6401 Planetary Gearbox Motor Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 64.4 64.4 71 71 71 77.4 77.4 77.4 77.4 83.8 83.8 83.8
Output torque ( mN.m) 100 140 340 462 656 1117 1555 2000 2000 2000 2000 2000
Total Weight(g) 131 131 137 137 137 143 143 143 143 149 149 149
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 23.4 30 36.4 42.8
Efficiency 90% 81% 73% 66%

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China NEMA 8 Ratio 27: 1 Planetary Gear Reducer Geared Stepper Motor with Gearbox     brushless motor	China NEMA 8 Ratio 27: 1 Planetary Gear Reducer Geared Stepper Motor with Gearbox     brushless motor
editor by CX 2023-03-31